Fascia Strip Vent is made to provide the required amount of intake by all building codes. This display can educate your customers and employees on how the product functions and how it should be installed. Fascia Strip Vent is virtually invisible from any view.
Fascia Strip Vent Display
$35.00
Provides 9sq. in. of Net Free Area per ft.
Description
This is a perfect size display for presenting the Fascia Strip Vent used for attic intake ventilation to customers. It shows where intake airflow goes through the vent flowing up through the fascia board.
To learn more about Fascia Strip Vent please visit: https://dciproducts.com/fascia-strip-vent/
Prior to installing Fascia Strip Vent, Cut 1” off the top of the fascia board, stopping 12” in from the edges and corners.
Cut a strip to use as an end cap from the roof edge to the bottom of the vent as shown (A).
All rake edges require this end cap. The Fascia Strip Vent does not extend further than the bottom of the 1” cutout as shown (B). Nail vents every 6” as shown. Nail end caps with 2 or 3 nails. Cover entire face with a new full size fascia board or aluminum capping extending onto roof.
Please click the link to download the installation instructions: Fascia Strip Vent Installation
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.