SmartBaffle 16 – insulation baffle for 14-½” wide rafter bays between rafters 16” On Center.

Description

SmartBaffle 16 are insulation baffles made for attic rafters that are separated 16″ on center.

Custom SmartBaffle application that seals the top plate as a windblocker.

DCI SmartBaffles are attic insulation baffles that are strong, durable, easy to work with and can be used in new construction or retrofit during renovations.

SmartBaffle 16 out-of-the-box size is 18-½”W X 36”L X 4mm (thick) and is constructed of rigid, corrugated plastic with two bending routes each route at 2.25” in from the long edge. After installed, the SmartBaffle is 14-½″ wide with 2″ flanges. These insulation baffles are strong enough to support spray foam expanding insulation creating the required air chute most shingle manufacturers require for shingle warranties.

Installation instructions can be downloaded from DCI Products by clicking the image.

To learn more about SmartBaffle and other top quality ventilation products visit www.dciproducts.com

What you need to know about SmartBaffle

Each piece can be very easily cut in half using a standard utility knife. The SmartBaffle can be cut in half for double coverage at the eaves area to guard against insulation blockage. Each cut piece would be 18” in length.

The SmartBaffle can be installed with a bent down starter to seal the soffit insulation as a weather barrier by simply scoring the two side flanges and bending down at the appropriate distance. What’s more is that the SmartBaffle can be installed from the roof or from the inside room or attic. As you can see the SmartBaffle is very versatile and cost effective.