- To install an aluminum capping over the FasciaVent ensuring the bottom vents are not covered.
- To install a wood or plastic wood fascia board over the FasciaVent and extending it 1/2" below the vent. Ensure the shingles overhang the top.
- When installing a gutter over the FasciaVent ensure the bottom of the gutter is even with or lower than the bottom of the vent.
-
Sale!FasciaVent allows air to enter through air channels in the vent and through the top of the existing fascia board, under the roof decking and traveling out the ridge vent at the top of the roof or other installed exhaust device. It can be retrofitted without removing the shingles if necessary. Your gutter can be installed directly onto the FasciaVent or other options are available such as:
-
Sale!Fascia Strip Vent allows air to enter through the fascia board, under the roof decking and out the ridge vent or other installed exhaust device. Fascia Strip Vent provides 9 square inches of net free area (9NFA) per lineal foot.
Interested in receiving more information and a sample? Click this link to fill out our request form.
-
Sale!SmartVent Tapered End Caps are 10.5″ square tapered ventilation pieces that seamlessly blend with US RoofVent & Smartvent to give the roof a more aesthetic and clean finish to your intake ventilation project.
Interested in receiving more information and a sample? Click this link to fill out our request form.
-
Sale!Regular Price $59.00 ON SALE $50.00 Size: 20 feet Pieces: One Continuous Roll Shipping: 12.95 Per Box Total linear Feet: 20 US RoofVent is a 20 foot roll for use as intake or exhaust ventilation of roof decks with a pitch of 3/12 or greater. US RoofVent can be used anywhere on the roof deck where ventilation is required.
Interested in receiving more information and a sample? Click this link to fill out our request form.
-
Sale!Drip Edge Extensions Made of Polyethylene. (Copper prevention tape sold separately. ) 15 pieces (partial box), 30 pieces (half box), 45 pieces (almost full box) and 60 pieces (full box). Other quantities available by calling DCI Products directly at 610-622-4455 and ask about Drip Edge Shingle Extensions. Copper Tape Peal and Stick and Black Silicone Shingle Adhesive (10 oz. cartridges) is also available by calling DCI Products to complete your order. For bulk orders please call us directly at 610-622-4455 and ask for Contractor Sales
-
Sale!Rooftop Algae/Moss Prevention Copper Tape (66 Feet) (Use with Drip-Edge Extensions ) Each copper tape roll contains 66 feet of single sided, peel and stick real copper tape. Rolls are one inch (1”) wide and are widely used for Algae and Moss prevention on asphalt shingles. The copper emits a natural chemical during a rainstorm that fights the algae/moss growth on the shingles BELOW the strip adhered to the Drip-Edge Extension by DCI Products. Use quality household scissors to cut the tape and Drip-Edge Extension. For bulk orders please call us directly at 610-622-4455 and ask for Contractor Sales Shipping: 9.95 Per Box Total Feet: 66
