| Bulk Discount Chart | ||
|---|---|---|
| 10-15 Boxes | 16-20 Boxes | 21+ Boxes |
| 5% | 7% | 10% |
-
Sale!Shipping costs per box $24.95 SmartBaffle is constructed of non-collapsing material with lifetime durability. Ease of installation by the contractor is achieved by the design, engineering and technology inherent in the baffle product. Designed for rafters that are 16 inch on-center. If you are looking for Baffles for rafters 24" on-center, follow this link to the SmartBaffle 24 page Please use the Pieces option below to select the thickness you require. Special discounts are available when ordering in full box quantities of 10 or more on any combination of SmartBaffle and StarterBaffles.
-
Sale!SmartVent Tapered End Caps are 10.5″ square tapered ventilation pieces that seamlessly blend with US RoofVent & Smartvent to give the roof a more aesthetic and clean finish to your intake ventilation project.
Interested in receiving more information and a sample? Click this link to fill out our request form.
-
Sale!Fascia Strip Vent allows air to enter through the fascia board, under the roof decking and out the ridge vent or other installed exhaust device. Fascia Strip Vent provides 9 square inches of net free area (9NFA) per lineal foot.
Interested in receiving more information and a sample? Click this link to fill out our request form.
-
Sale!BattenVent eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. BattenVent is an under-plywood, top-of-rafter vent easily installed during the construction of an addition or a new home. The BattenVent provides adequate ventilation in the spaces to either side of the vent placement. If you are looking for 2-3/8" wide BattenVents click here It is a required vent product when your soffit to ridge air flow is blocked by a skylight or dormer. BattenVent easily allows air movement in those trapped areas.
1.5" venting strips
Interested in receiving more information and a sample? Click this link to fill out our request form.
DCI Products is the manufacturer of BattenVent. You can find more information about BattenVent here: https://dciproducts.com/battenvent/ It eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. Please use the Size option below to select the thickness you require. -
Sale!BattenVent eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. BattenVent is an under-plywood, top-of-rafter vent easily installed during the construction of an addition or a new home. The BattenVent provides adequate ventilation in the spaces to either side of the vent placement. If you are looking for 1-½″ wide BattenVents click here It is a required vent product when your soffit to ridge air flow is blocked by a skylight or dormer. BattenVent easily allows air movement in those trapped areas. DCI Products is the manufacturer of BattenVent. You can find more information about BattenVent here: https://dciproducts.com/battenvent/ It eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas.
Interested in receiving more information and a sample? Click this link to fill out our request form.
Please use the Size option below to select the thickness you require. -
Sale!CedarVent eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. CedarVent is an under-plywood, top-of-rafter vent easily installed during the construction of an addition or a new home. The CedarVent provides adequate ventilation in the spaces to either side of the vent placement. If you are looking for 1-½″ wide CedarVents, click here It is a required vent product when your soffit to ridge air flow is blocked by a skylight or dormer. CedarVent easily allows air movement in those trapped areas. DCI Products is the manufacturer of CedarVent. You can find more information about CedarVent here: https://dciproducts.com/cedarvent/ It eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas.
Interested in receiving more information and a sample? Click this link to fill out our request form.
Please use the Select Thickness option above to select the thickness you require. -
Sale!CedarVent eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. CedarVent is an under-plywood, top-of-rafter vent easily installed during the construction of an addition or a new home. The CedarVent provides adequate ventilation in the spaces to either side of the vent placement. If you are looking for 2-3/8" wide CedarVents, click here It is a required vent product when your soffit to ridge air flow is blocked by a skylight or dormer. CedarVent easily allows air movement in those trapped areas. DCI Products is the manufacturer of CedarVent. You can find more information about CedarVent here: https://dciproducts.com/cedarvent/ It eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas.
1.5" venting strips
Interested in receiving more information and a sample? Click this link to fill out our request form.
Please use the Size option below to select the thickness you require. -
Sale!RafterVent eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. RafterVent is an under-plywood, top-of-rafter vent easily installed during the construction of an addition or a new home. The RafterVent provides adequate ventilation in the spaces to either side of the vent placement. If you are looking for 2 3/8" wide RafterVents, click here It is a required vent product when your soffit to ridge air flow is blocked by a skylight or dormer. RafterVent easily allows air movement in those trapped areas. DCI Products is the manufacturer of RafterVent. You can find more information about RafterVent here: https://dciproducts.com/raftervent/ It eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. Please us the Select Size/Thickness option above to choose the thickness you require.
Interested in receiving more information and a sample? Click this link to fill out our request form.
-
Sale!CedarVent eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. CedarVent is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. CedarVent is an under-plywood, top-of-rafter vent easily installed during the construction of an addition or a new home. The CedarVent provides adequate ventilation in the spaces to either side of the vent placement. If you are looking for 2-3/8" wide CedarVents, click here CedarVent is a required vent product when your soffit to ridge air flow is blocked by a skylight or dormer. CedarVent easily allows air movement in those trapped areas. DCI Products is the manufacturer of CedarVent. You can find more information about CedarVent here: https://dciproducts.com/cedarvent/ CedarVent eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. CedarVent is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. Please use the Size option below to select the thickness you require.
