-
Sale!
Extra discounts on SmartBaffle when you bulk order up to an additional 10%*
SmartBaffle is constructed of non-collapsing material with lifetime durability. Ease of installation by the contractor is achieved by the design, engineering and technology inherent in the baffle product. Designed for rafters that are 16 inch on-center. If you are looking for Baffles for rafters 24" on-center, follow this link to the SmartBaffle 24 page Shipping costs per box $24.95 Please use the Pieces option below to select the thickness you require. *Additional Discounts are based on 10 or more full boxes and are shown in the Cart and Checkout pages. -
Sale!FasciaVent allows air to enter through air channels in the vent and through the top of the existing fascia board, under the roof decking and traveling out the ridge vent at the top of the roof or other installed exhaust device. It can be retrofitted without removing the shingles if necessary. Your gutter can be installed directly onto the FasciaVent or other options are available such as:
- To install an aluminum capping over the FasciaVent ensuring the bottom vents are not covered.
- To install a wood or plastic wood fascia board over the FasciaVent and extending it 1/2" below the vent. Ensure the shingles overhang the top.
- When installing a gutter over the FasciaVent ensure the bottom of the gutter is even with or lower than the bottom of the vent.
-
Sale!
StarterBaffle™ is designed for use with both 16” and 24” On-Center attic rafter bays.. These insulation baffles are strong, durable, easy to work with and can be used in new construction or retrofit during renovations.
$14.95 shipping. -
Sale!SmartVent Tapered End Caps are 10.5″ square tapered ventilation pieces that seamlessly blend with US RoofVent & Smartvent to give the roof a more aesthetic and clean finish to your intake ventilation project.
-
Sale!US RoofVent is a 20 foot roll for use as intake or exhaust ventilation of roof decks with a pitch of 4/12 or greater. US RoofVent can be used anywhere on the roof deck where ventilation is required. Standard Price $59.00 ON SALE $50.00 Size: 20 feet Pieces: 1 Shipping: 12.95 Per Box Total Feet: 20
-
Sale!BattenVent eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. BattenVent is an under-plywood, top-of-rafter vent easily installed during the construction of an addition or a new home. The BattenVent provides adequate ventilation in the spaces to either side of the vent placement. If you are looking for 2-3/8" wide BattenVents click here It is a required vent product when your soffit to ridge air flow is blocked by a skylight or dormer. BattenVent easily allows air movement in those trapped areas. DCI Products is the manufacturer of BattenVent. You can find more information about BattenVent here: https://dciproducts.com/battenvent/ It eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. Please use the Size option below to select the thickness you require.
1.5" venting strips
-
Sale!Flo-Free Leaf Guard is easy to install and comes in 5 inch, 6 inch, 1/2 round and custom sizes. Once installed it is invisible from the ground. This gutter guard has a smooth, slick, non-stick top that allows leaves and debris to slide off and fall to the ground instead of gathering in your gutters.
-
Sale!Fascia Strip Vent allows air to enter through the fascia board, under the roof decking and out the ridge vent or other installed exhaust device. Fascia Strip Vent provides 9 square inches of net free area (9NFA) per lineal foot.
-
Sale!BattenVent eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. BattenVent is an under-plywood, top-of-rafter vent easily installed during the construction of an addition or a new home. The BattenVent provides adequate ventilation in the spaces to either side of the vent placement. If you are looking for 1-½″ wide BattenVents click here It is a required vent product when your soffit to ridge air flow is blocked by a skylight or dormer. BattenVent easily allows air movement in those trapped areas. DCI Products is the manufacturer of BattenVent. You can find more information about BattenVent here: https://dciproducts.com/battenvent/ It eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. Please use the Size option below to select the thickness you require.
-
Flo-Free Leaf Guard is easy to install and comes in 5 inch, 6 inch, 1/2 round and custom sizes. Once installed it is invisible from the ground. This gutter guard has a smooth, slick, non-stick top that allows leaves and debris to slide off and fall to the ground instead of gathering in your gutters. For bulk orders please call us directly at 610-622-4455 and ask for Contractor Sales
-
Flo-Free Leaf Guard is easy to install and comes in 5 inch, 6 inch, 1/2 round and custom sizes. Once installed it is invisible from the ground. This gutter guard has a smooth, slick, non-stick top that allows leaves and debris to slide off and fall to the ground instead of gathering in your gutters. For bulk orders please call us directly at 610-622-4455 and ask for Contractor Sales
-
Sale!Each box contains 48 feet (16 three foot sections) of Flo-Free Leaf Guard. Easy to install and once installed, is invisible from the ground. This gutter guard has a smooth, slick, non-stick top that allows leaves and debris to slide off and fall to the ground instead of gathering in your gutters. For bulk orders please call us directly at 610-622-4455 and ask for Contractor Sales Shipping: 12.95 Per Box Total Feet: 48
-
Sale!CedarVent eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. CedarVent is an under-plywood, top-of-rafter vent easily installed during the construction of an addition or a new home. The CedarVent provides adequate ventilation in the spaces to either side of the vent placement. If you are looking for 1-½″ wide CedarVents, click here It is a required vent product when your soffit to ridge air flow is blocked by a skylight or dormer. CedarVent easily allows air movement in those trapped areas. DCI Products is the manufacturer of CedarVent. You can find more information about CedarVent here: https://dciproducts.com/cedarvent/ It eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. Please use the Select Thickness option below to select the thickness you require.
-
Sale!CedarVent Plus is manufactured from polyethylene plastic and includes a factory-installed weather barrier. Measuring 2 3/8 inches wide by 36 inches long, it is available in a variety of thicknesses to provide maximum flexibility for installation.
-
Sale!CedarVent eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. CedarVent is an under-plywood, top-of-rafter vent easily installed during the construction of an addition or a new home. The CedarVent provides adequate ventilation in the spaces to either side of the vent placement. If you are looking for 2-3/8" wide CedarVents, click here It is a required vent product when your soffit to ridge air flow is blocked by a skylight or dormer. CedarVent easily allows air movement in those trapped areas. DCI Products is the manufacturer of CedarVent. You can find more information about CedarVent here: https://dciproducts.com/cedarvent/ It eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. Please use the Size option below to select the thickness you require.
1.5" venting strips
-
Sale!New! Presenting a DCI Breathable/Water-Proof Underlayment! Max. Protection! SmartRoofDeck UnderLayment- SRD-30” Vented Roll Size and Coverage: 30” x 164 feet yields, 402 square feet of SRD-30 Underlayment It ventilates attic areas while waterproofing above deck areas from condensation (That covers over 12 sheets of plywood!)
Shipping $17.95 per roll
-
Sale!RafterVent eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. RafterVent is an under-plywood, top-of-rafter vent easily installed during the construction of an addition or a new home. The RafterVent provides adequate ventilation in the spaces to either side of the vent placement. If you are looking for 1-1/2″ wide RafterVents, click here It is a required vent product when your soffit to ridge air flow is blocked by a skylight or dormer. RafterVent easily allows air movement in those trapped areas. It eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. Please us the Size option below to select the thickness you require.
2-3/8" wide venting strips
-
Sale!Eliminate clogged downspouts with the Smart Gutter Strainer. Pre-sized to fit 5" K-style gutters by just changing direction of the rectangle Strainer. Even when leaves are in the gutter, water will flow down the spout without blocking the underground pipes or elbows because no large debris can get through. Great to use when doing a new roof project or a re-roof project to protect the downspouts from getting clogged inside the spouts with shingle cut-offs and shingle debris and other jobsite debris such as nails and underlayment. Ensures the rain water will always pass through the downspouts after the roof job is completed. Easy to shake clean on your annual gutter cleaning project and quickly re-insert because it is re-usable year after year. Also great for pine needles too. Water passes right through the Smart Gutter Strainer. Smart is an acronym for “Save Money And Reduce Time!” (That’s SMART!) Size: For 5" K style gutters Pieces: 6 Shipping: 9.95 Per Box
-
Sale!RevealTape is a shingle layout tape to easily prep your roof for shingles. Great for an individual or multiple crews. This time saving product comes in rolls of 200 feet. It is available in 5", 5 5/8" and 8" shingle reveals.
- Shingle layout tape - non adhesive
- 200 Feet per roll
- For Shingle Reveals of 5"
- Layout tape for roof valleys
- For perfect chalk line striking around obstacles.
-
Sale!Eliminate clogged downspouts with the Smart Gutter Strainer. Pre-sized to fit 5K & 6K gutters by just changing direction of the rectangle Strainer. Even when leaves are in the gutter, water will flow down the spout without blocking the underground pipes or elbows because no large debris can get through. Great to use when doing a new roof project or a re-roof project to protect the downspouts from getting clogged inside the spouts with shingle cut-offs and shingle debris and other jobsite debris such as nails and underlayment. Ensures the rain water will always pass through the downspouts after the roof job is completed. Easy to shake clean on your annual gutter cleaning project and quickly re-insert because it is re-usable year after year. Also great for pine needles too. Water passes right through the Smart Gutter Strainer. Smart is an acronym for “Save Money And Reduce Time!” (That’s SMART!) Size: For 6" K style gutters Pieces: 6 Shipping: 9.95 Per Box
-
Sale!RafterVent eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. RafterVent is an under-plywood, top-of-rafter vent easily installed during the construction of an addition or a new home. The RafterVent provides adequate ventilation in the spaces to either side of the vent placement. If you are looking for 2 3/8" wide RafterVents, click here It is a required vent product when your soffit to ridge air flow is blocked by a skylight or dormer. RafterVent easily allows air movement in those trapped areas. DCI Products is the manufacturer of RafterVent. You can find more information about RafterVent here: https://dciproducts.com/raftervent/ It eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. It is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. Please us the Size option below to select the thickness you require.
-
Sale!CedarVent eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. CedarVent is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. CedarVent is an under-plywood, top-of-rafter vent easily installed during the construction of an addition or a new home. The CedarVent provides adequate ventilation in the spaces to either side of the vent placement. If you are looking for 2-3/8" wide CedarVents, click here CedarVent is a required vent product when your soffit to ridge air flow is blocked by a skylight or dormer. CedarVent easily allows air movement in those trapped areas. DCI Products is the manufacturer of CedarVent. You can find more information about CedarVent here: https://dciproducts.com/cedarvent/ CedarVent eliminates the need to drill holes in the rafters to ventilate areas trapped by construction supports. Use it in areas otherwise unventilated and considered problem areas. CedarVent is very versatile and can be used on wall surfaces between siding and wall sheathing, allowing air to move between those areas. Please use the Size option below to select the thickness you require.
-
Sale!The most popular uses of Utilimat are for the Refrigerator Crisper and the Laundry Tub/Sink. Cut the Utilimat to fit loosely at the bottom of the Crisper or the Tub/Sink and lay flat on the bottom with the smooth side up.
StarterBaffle™ is designed for use with both 16” and 24” On-Center attic rafter bays.. These insulation baffles are strong, durable, easy to work with and can be used in new construction or retrofit during renovations.
$14.95 shipping. 
Shipping $17.95 per roll 
Customer Service
Resources & Tools
Special Offers
Join our email to receive exclusive offers.
Oops! We could not locate your form.
© Copyright 2026 | Smart Roof Products | All Rights Reserved
